Friday, October 26, 2012

Product Review: ROL Wheels



Intro
Since 2 years I’ve been training and competing using wheels made by ROL Wheels, a local Austin-based company. I’ve raced on many, many wheels in the past – alloy, carbon, clincher, aero, deep-dish, low-profile, tubular – you name it. Having lived and raced bicycles in Texas and the region it is good to have the support of a local company. Not only do they provide me with their latest products but I feel like they actually care about my feedback and want to know how their wheels endure under my daily training and weekly racing. I don’t have to call the customer service of some wheel company; I can just go straight do Sean Lambert, the CEO of ROL, check into the office, chat with the wheel builders, “talk shop”, and built a good athlete-business relationship. It’s awesome and I’m very thankful for their support and help in the last 2 years.

ROL 58 Carbon Tubular
The ROL 58 Tubies are my standard “go-to” wheel when I do road races or fast, technical crits. At 58mm they’re aerodynamic but still not too deep for the Texas wind. Mine have a set of in-house 3D forged ROL alloy hubs, Sapim spokes, and a basic 58mm carbon rim.  The Japanese steel bearings are super smooth and don’t require much maintenance. Those wheels weigh in at 1465grams and I’ve ridden them to race wins on the road and even in Cyclocross. The 21mm wide carbon rim usually meets with a Vittoria EVO SC 23mm tubular tire as my preferred wheel/tire combination. When used in Cross, I put on 32 or 33mm Challenge Grifo tubies (with the “Belgian tape” method for added support). Even with bumpy Crits (think bricks) or Cross (think dirt, logs, sandpits, roots) I’ve never been able to get them out of true or break a spoke on these wheels!
Carbon 58 all blacked out. Only shows it's true decals with flash at night!
Sporting the 58 Tubular Rear and 38 Tubular up front at 2011 Ruts 'N Guts in Oklahoma
The new ROL logo becomes visible with flash
ROL C58 Carbon Clincher
If you’re looking for a nice, lightweight, stiff carbon Crit wheel yet don’t want to mess with gluing tires then this is what I' would recommend. Why spent $2700 on a set of ZIPP 404 Carbon Clinchers when you can get these for half the price? I use a set with DT Swiss 240 Hubs and I race pretty much every local Thursday Night Driveway Crit on it. I’ve never owned a pair of carbon clinchers until Sean gave me those to try and I love ‘em! They are very durable, stiff, with 20 spokes up front, and 24 in the rear. The Driveway is a race course where you can see some of the highest power numbers all year long, given the nature of the race course and the competition. Lots and lots of force being pushed onto the pedals but these wheels never failed on me. No hassle in case you flat riding out to the Driveway, you can change your tube like a regular clincher yet you have a nice carbon race wheel. I also raced a pair of these in a 7-day stage race in the Dominican Republic, where we encountered many potholes and some rough roads....But except one flat these wheels held up on Central American roads (and off-roads!). I usually run Michelin Pro 4’s (23mm) on these rims; again they’re 21mm wide.
C58 - Crit wheel!
The C58 Carbon Clincher is a great every day crit wheel, aero yet light and quick to respond
ROL 38 Carbon Tubulars
Just like the ROL 58 Tubies, the C38 wheels are made for road racing, with the slight difference that they’re a bit lighter, more low-profile at 38mm and good for hilly road and circuit races with climbing. I raced a set of these wheels - with Vittoria EVO SC 23mm tubular tires mounted -  all year in 2011 and won a few P12 races with them (road and cyclocross). They have crossed the Continental Divide at 7080ft. in the Gila National Forest at the Tour of the Gila in New Mexico and were my wheel of choice at the Tour de Depot in Salt Lake City, UT. In Utah, I put them to a test in freezing temperatures and sleet & snow. The perfect wheel if you’re looking to save some extra weight and aerodynamics don’t play a huge role. Weighing in at an amazing 1225grams!
The C38 carbon tubulars are a great mix of aerodynamics and lightweight. Here after winning Tour de Depot Stage Race in Utah
1210grams for the C38's!
ROL C25 Tubulars
Best climbing wheel I’ve ever ridden. No question, period! They feature the already mentioned DT Swiss 240 hubs, a 23mm wide and 25mm high full-carbon rim. Similar to a pair of Corima's. Weighing in at just 1100grams, too! You put a 23 or 24mm tubular tire on these bad boys and they’re a great wheelset to have when it goes uphill. I raced those at UCI Tour of the Gila for all stages (except the TT), including the downtown Criterium. Also ridden at the Joe Martin Stage Race's final hilly & 13-turn Crit – and no problem on these! Super stiff, supple and perfect in the corners. With the wider, 23mm rim you can run lower pressure and I usually would air them up to ~100psi combined with a 23mm Vittoria EVO SC tubular tire. These are still prototype and not in full production. But you might be able to score a pair to test-ride if you ask Sean nicely…!

The C25 Carbon Tubulars are great for hilly, technical Crits like Joe Martin Crit or Stillwater at Nature Valley
 
ROL Race SL Clincher
When it comes to every day riding, this is my wheel. Durable, durable, durable! A alloy clincher with a fat 23mm wide and 30mm high rim makes for a super comfy ride on asphalt, chip ‘n seal or even on a dirt or gravel road when you’re way out in the country. Weighing in at just 1520grams it’s the perfect training wheel. They’re very stiff (spoke count: 24R, 20F), corner really well and I feel very safe going down a fast, steep descent at 45+mph. For a rainy Crit I choose these wheels, too because I know they’re indestructible in any weather conditions, the brake surface is very robust and my SwissPads have good grip in rain and sunshine. I’m running some 23mm wider Continental Gatorskins with these wheels and combined with the wide rim I can run a comfortable 95-100psi for a normal day’s ride. They tire itself is actually 2-3mm wider once put onto a wide rim (see pic below). It’s pretty much impossible to pinch-flat these if you put a thick, heavy-duty tire on the rim. Note: these are tubeless compatible, too!
Race SL's
The Race SL's are great for dirt riding, as shown here at the 2012 Wooly Mammoth Ultra Provocatorio Invitationale
Put a 23mm Gatorskin on a 23mm rim and get a 25mm tire!
ROL Race SLR Clincher
Just like the Race SL, this wheel set features a 23mm wide rim and is tubeless-ready, too. Key difference here is the spoke count: SLR has 24 up front and 28 in the rear. In my case, they’re both double-laced in the front and rear as these are my Cyclocross wheels for every day riding. Super stiff and the double-laced spokes in the front make the wheel great for Cross where you tend to hit some objects pretty hard sometimes when out on trail. I’m running these as tubeless, with a 32mm wide KENDA Slant-Six tire and some Stan’s No Tubes sealant. The wide rim with the 32mm tires make for a great combination when I go out on some rough trails which usually feature roots, some rocks and other obstacles. I can ride over them at speed and keep up with my buddies on Mountain Bikes because I know I won’t flat on these bad boys. They’re my spare wheels for Cyclocross and on my pit bike. So in case I flat my ROL 58 Carbon Tubulars I know I got a set of the Race SLR tubeless wheels in the pit waiting for me :-)

My new favorite: The Race SLR with double-laced spokes front and back (24F/28R) and KENDA tubeless tires. Awesome wheel for every day riding on the trails, grass, sand, gravel, dirt etc.
And there’s more exciting stuff to come from ROL Wheels soon. For example, a new alloy tubular wheel is being tested right now and soon out for public release. Check them out at www.rolwheels.com or call the office at 512-219-1145

Tuesday, October 16, 2012

US Elite Track National Championships

This year, the end of my cycling season looked a little bit different: Instead of 3-4hr road races I focused exclusively on the track. Yes, correct...track! People ask me: "I didn't know you raced track". And also "There's no velodrome in Austin, or"? True, there's no velodrome in Austin (not yet) but I grew up racing left-turn only and fixed gear. My hometown track was in Heidenau and I spent a TON of time there training and racing when I was a Junior and U23 racer. I remember doing 160lap Points races pretty much every Wednesday during the summer when I was a Youth(15/16) and Junior(17/18) rider. As a junior rider in Germany it's pretty much standard that you race on the velodrome so I did Nationals a few times but never with outstanding results. It was more to work on speed, learn how to race in large fields w/ out brakes and become a better rider overall.

Fast forward 12-15years and I'm in Carson, CA for my first US Elite Track National Championships. Well, I already did the Omnium Elite Track Nats in August (which USA Cycling separated from the regular Nats for the first time this year) and came away with the Silver there. But racing in L.A. at the Velo Sports Center at the "regular" Nationals was a bit different. Olympian Bobby Lea, who raced the Omnium in London 2012, was in attendance and several other heavy hitters (mainly road pro's) so the competition was a bit stiffer in L.A. But I was confident and knew I trainer hard for my 2nd National Championships as an US Citizen - finally, at age 31!

Individual Pursuit #1: Go as hard as you can for 4 1/2 to 5min and don't blow up or go out too fast. That's the rule of thumb. You can prepare pretty simple for it, on the track and off the track. I did a bunch of 5min intervals (see the screenshot of a training ride below), over and over, back-to-back with some short breaks. At Nationals you race a qualifying round first, and if you make it into the Top 4, you go on into the finals. I thought Top 5 (American Podium as I call it) was possible. I've done 4:55 in Houston on a bumpy track 2 weeks before and with the power numbers I was hitting in the intervals I knew I can go faster. I ended up 3rd into the qualifying around after I rode high 17's and low 18's for the 4K. I got a bit too excited and caught the other rider just 1K into my pursuit but I was able to pretty much hold the speed and didn't blow up. 4:43. 1.5seconds away from the 1-2 final, which Bobby Lea and Donoghue (guy who won Pursuit at Omnium Nationals) were going to contest. 

Scratch Race #1: For the Scratch we had qualifying heats not much after my pursuit. Change bars, gears and get going again. For those of you who never done a Scratch race, it's basically a Crit on the track. First rider across the line wins. So if it comes down to a sprint you gotta be in the Top 12 if you wanted to qualify for the Final in the evening. Halloway lapped the field solo early on after everyone in my heat let him just ride away. I figured I don't want to risk anything and wait until the final sprint and try to get Top 12. With 8 or 10 laps to go I went for it, attacked hard from top and just solo'd in for 2nd in my heat and ahead of the bunch. Morning session complete, back for more in the evening! 

Individual Pursuit #2: Back to the track for the "Little Final", where I raced Ian Burnett (Competitive Cycling). Basically you're trying to go as fast as possible again, just have to dig deeper. It's been a while (10+ years?) that i've done two 4K pursuit races in one day but I knew I had to go a bit faster than 4:43 (my morning time) to make sure to get that Bronze medal. Both of us rode very equally and made it a race. It was pretty awesome actually. For the first 2000m I looked over and saw Ian hitting the s/f line at back-stretch the same time like I did on the home-stretch. Since I started a bit more conservative and only rode a 1:11 for the first 1000m I knew I had something left in the tank. With 8 laps to go I dug deep and I came in w/ 4:41 and a new PR and secured 3rd behind Lea and Donoghue. 

Scratch Race #2: 15 minutes after my IP little final we already race the Scratch race final. I could tell I had a long day already. I didn't really have time to change gears so I raced a bigger gear than usual for that race and combined with some heavy legs that made for only a mediocre Scratch and a 9th place. Kind of disappointing but besides Lea (who placed 5th) all the other guys who raced the IP finals didn't do so well. Friday: off-day! Sleep-in, Ride to the beach and checking out the $$$$$$$ homes along Torrance Beach etc. Relax.

Points Race #1: As for the Scratch race, there were two qualifying heats for the Points Race. With Lea and Dan Holt (two-time Elite National Points Race Champion) in my heat I knew I had to pay attention and go with those guys to make sure I roll through easy. That's exactly what happened. 30 laps or so in 5 of us, including Lea & Holt) got off the front and ended up taking a lap to secure our spot in the Final in the evening; I ended up 4th.

Points Race #2: Saturday Night was pretty crowded, a lot more spectators, live-video coverage on the internet, and some big finals (Men's Keirin, Women's Sprint etc.). The Points Race was pretty much the last event of the evening so it was a long time before we actually got to race. warm-up, staying hydrated, eat some but not too much, keep mentally focused until 8:30 or so for 160 laps of Points Race fun. Again, I was confident I can pull of a podium, but it was going to be a bit tougher than just racing 4000m all out like in the Pursuit. Nothing would go far for the 1st 3rd of the race and I stayed conservatively. I rode in a bit smaller gear then the Scratch, too which allowed my a higher cadence and being able to jump/react quicker. At one point, Lea and 4 or 5 others got 1/3rd lap, then a 1/2 lap and looked like to lap the field. I wasn't there and not happy. Lea was the only rider who managed to gain a lap on the field, the rest came back. So we were racing for 2nd. I managed to win 5 points going off the front once. I sat out one sprint, relaxed, and went after another rider solo, caught up, got the sprint/points and was back in the field. With 10-point I sat 5th or 6th with maybe 30 laps to go. To be on the podium for sure, I need to get some more so I went off the front with another ride and we timed it just ride and I got the full 5 pts again, getting me to 15 pts, tied for 3rd before the last and final sprint. 3rd, 4th, and 5th was all at the same points and 6th wasn't far down, 1 point. I figured I won't be out-sprinting Halloway, Lea & Co. in the final sprint so w/ 2 laps to go I went after Moir who was off the front since 4 or 5 laps to go. I caught him with a lap to go but there were too many guys still trying to get onto the podium and I was caught with less than 1/2 lap to go and got no points. Still, 5th at the end of the day behind Lea, Halloway, Donoghue, and Holt.

The Madison: For the final day I teamed up with my main "rival" from Omnium Nationals earlier in August: Zak Kovalcik. He's got a sprint/acceleration I don't have on the track so we knew we could be in the hunt for a Podium spot. Only thing is: we never raced a Madison together! Last time for me was at Texas Cup at the Superdrome in Frisco a few years back and before that as a Junior back in Germany. So we just had a little bit of time to "sync" our throws and make sure our technique is good enough to give each other enough momentum. And we knew we had to make up our lack of never having raced together before by just pedaling harder! The Madison field was not too big, 9 or 10 teams; pretty normal for Nationals actually. Still, it was fast from the start and we it took us a while to make things smooth. Once or twice I ended up having to sprint whereas we had planned to have Zak for it. That cost us a bit but Zak did win the points when he was in position and we were sitting 5th or 6th for most of the 200 lap/50 km race. Several teams tried to take a lap but just came up short by less than 30 meters or so. That evened the way for Lea/Simes to take the win by 5points. We were doing okay, nothing stellar but had to fight hard for 5th. Zak scored another 2 points when he was "on duty" and we ended up 5th, just 2pts ahead of TeamTyper1's Holt & Eldrigde in 6th. Whew. Overall, not bad considering it was our "first rodeo" together. But yeah, we both know that with a bit more specific training and a few Madison's together we can compete for the Top3 rather than fighting for 5th place.

All in all a successful first trip to L.A. for Elite Track Nationals. Special thanks to my team, Tulsa Tough pb ICEdot, for their year-long support; the Superdrome and Alkek crowd for helping me at the local track/races etc., Shawn from Laguna Beach Cyclery for letting me use one of their Colnago road bikes while in L.A.; Todd Minehardt for donating some of his track gear to me; Max Bookman of MAX Training for helping me with some core/strength conditioning to get ready for Nats; and last but not least Wes for letting me use his super slick Speedsuit for the Individual Pursuit!

Now it's time to take some time off, and get back to some basic strength, conditioning training and a bit of Cyclocross here and there!

interval training example leading up to Nats. Goal: 375-380W for 4:45, and repeat!

IP Qualifying (photo: Erika Fulk)
IP Podium

Points Race Action (photo: VeloImages)

Felt, time to sponsor someone ;-)

Points Race Podium

My "cubicle" for the weekend

Torrance Beach

Was looking for "The Hoff"
Torrance Beach
Madison

Madison Podium with Zak

Thursday, October 11, 2012

Tuesday Nighter Road Clean-Up, Saturday, October 13, 9am

Yep, you heard it right: Fall Clean-Up for the "Nighter"! We're planning on giving the traditional "Tuesday Nighter" a little face lift.

City of Austin/Travis County recently cut & trimmed a bunch of trees & bushes along our favorite Tuesday Night course. Only problem is: there's tons of trash left and right along Thaxton Rd, Old Lockhart Rd, and Nuckols Crossing Rd. on the 9mile loop.

If you care about riding in South East Austin, and like to ride along "green roads" please come out or share this with your friends. This coming weekend is no CycloCross Race, no MTB Race, and no Road Race happening in Texas - and it's off-season! (Okay, it's ACL weekend but you can go later).

When: Saturday, October 13, 9am (plan on 2hrs or so)

Where: traditional Tuesday Nighter starting point on Thaxton Rd and Alum Rock Dr, Austin, TX (Map here: http://bit.ly/UMY3qV)

What to bring: some solid shoes and good attitude! If you drive out, carpool and bring your pick-up truck.

We'll provide some heavy duty trash bags and gloves. Some refreshments, too. You can ride your bike out, too but make sure to bring a lock or even better, take your commuter bike.

Any questions? Email me stefanrothe81 at gmail dot com

See you Saturday morning!

Note: in the case of rain, we'll postpone for another weekend in the Fall/Winter and post something on the www in advance.